Torch Paste is Patent Pending and is specially formulated to minimize leaks when used with reusable or one-time use stencils.  Torch Paste can be used on wood, cardboard, card stock, denim and more to create unique burned designs.

How to Use Torch Paste:   A little goes a long way!!

• When using on wood, sand your surface first; we recommend sanding smooth with 220 grit sandpaper.
• Add your stencil and rub down well to adhere to surface first
• Apply a THIN layer of Torch Paste with a squeegee.  A LITTLE GOES A LONG WAY!
• Scrape off excess and return to jar for many more projects!
• Remove stencil and allow Torch Paste to absorb/dry for at least 2-3 minutes.
• Use a high powered heat gun @ 400+C or @ least 775F
• Move the heat over design until the design begins to burn; more heat equals darker burn.  Watch your design come to life!
• After design is burned, allow surface to cool then wipe away debris with dry cloth.
• Finish project with stain or sealer (if applicable) or leave natural.

Torch Paste Features:

• Exclusive concentrated formula perfect for using with stencils
• Made in USA
• Conforms to ASTM D-4236
• 3 oz weight
• Store in cool, dry area; <70F
• Do not eat
• Use only for intended purposes
• Burn safely using goggles and PPE in a well ventilated area.
• Keep out of reach of children 12 & under.

**Each 3 oz Jar of Torch Paste creates approximately 30 - 8in x 10in projects -Dependent on the negative space of chosen stencil(s)**