20% OFF shipping at www.midwoodautocraft.com on orders over $79 + up to 10% OFF products
www.midwoodautocraft.com
home > Raymarine SeaTalk 2 / NMEA 2000 Interface Cable (1.5m) > Raymarine SeaTalk 2 / NMEA 2000 Interface Cable (1.5m)
download picture
Raymarine SeaTalk 2 / NMEA 2000 Interface Cable (1.5m)Unlock seamless communication between your Raymarine E Series displays and a world of compatible devices with this essential interface cable. Designed for marine environments where reliability is non negotiable, it bridges the gap between legacy SeaTalk 2 networks and modern NMEA 2000 systems. Whether you're integrating third party sensors, chartplotters, or autopilots, this 1. 5 meter cable ensures your boat's electronics talk to each other without a
Shopping security

Shopping security

Each payment you make on thelockerguy is secured with strict SSL encryption and PCI DSS data protection protocols

Unlock seamless communication between your Raymarine E-Series displays and a world of compatible devices with this essential interface cable. Designed for marine environments where reliability is non-negotiable, it bridges the gap between legacy SeaTalk 2 networks and modern NMEA 2000 systems. Whether you're integrating third-party sensors, chartplotters, or autopilots, this 1.5-meter cable ensures your boat's electronics talk to each other without a hitch, keeping you focused on the water ahead.

Key Features That Stand Out on the Water

  • Dual-Compatible Design: One end features a twist-lock connector tailored for E-Series displays, while the other sports a rugged 5-pin waterproof SeaTalk 2-style plug—perfect for direct hookups to NMEA 2000 backbones or Raymarine networks.
  • Compact 1.5m Length: Long enough for flexible routing in tight console spaces, yet short enough to minimize signal noise and clutter in your helm setup.
  • Marine-Tough Build: Fully waterproof and resistant to corrosion, vibration, and UV exposure, it thrives in saltwater spray, pounding waves, and relentless sun.
  • Plug-and-Play Simplicity: No complex adapters or custom wiring needed—just connect and power up to share data like GPS position, depth, speed, and heading across your network.

Why This Cable Elevates Your Onboard Electronics

Imagine effortlessly expanding your E-Series setup to include the latest fishfinders, radar units, or engine monitors from other brands. This interface eliminates compatibility headaches, enabling real-time data fusion that sharpens your situational awareness. Boaters report fewer dropped signals and quicker diagnostics during long offshore runs, translating to safer voyages and less downtime. It's not just a cable—it's the backbone that unifies your vessel's tech ecosystem, future-proofing your investment in Raymarine gear.

Step-by-Step Installation for Smooth Sailing

  1. Prep Your Network: Ensure your SeaTalk 2 backbone or NMEA 2000 spur is powered and terminated correctly—double-check drop cables and T-connectors to avoid bus errors.
  2. Connect to E-Series: Align the twist-lock end with your display's port, twist securely until it clicks, and route the cable neatly with zip ties to prevent snags.
  3. Link to Backbone: Plug the 5-pin end into an available SeaTalk 2 socket or NMEA 2000 drop—watch for the satisfying snap that confirms a solid seal.
  4. Power Cycle and Test: Restart your E-Series unit, navigate to network settings, and verify data flow. Pro tip: Use Raymarine's diagnostic tools to scan for active devices and confirm integration.
  5. Secure and Waterproof: Apply dielectric grease to connections for extra protection against moisture ingress, especially in open cockpits.

Most installs take under 15 minutes, even for DIYers. If you're dealing with a mixed network, prioritize backbone power at a single point to prevent voltage drops.

Proven Compatibility and Expansion Ideas

This cable shines with E-Series multifunction displays (like E7, E9, or older classics), linking them to SeaTalk 2 instruments or any NMEA 2000-certified gear. Think Lowrance transducers, Garmin autopilots, or Simrad engines—data flows bidirectionally for overlays on your charts. For larger setups, pair it with backbone extenders to connect multiple E-Series units, creating a unified command center. Always match baud rates (typically 4800 for SeaTalk 2, 250k for NMEA 2000) to sidestep communication glitches.

Long-Term Care for Peak Performance

Rinse with fresh water after every salt exposure, inspect connectors quarterly for corrosion, and store spares in a dry locker. If signals falter, swap ends to rule out cable faults—common in high-vibration installs. This durability means one cable often outlasts multiple seasons of heavy use.

Frequently Asked Questions

SeaTalk 2 / NMEA 2000 Interface Cable (1.5m)

Interface cable for connecting E-Series displays to Raymarine SeaTalk 2 or 3rd party NMEA 2000 Devices.

Twist-lock connector at the E-series display end, and a standard 5-pin waterproof SeaTalk 2 style connector at the other.


The twist-lock connector on the end of the E series display screen, and the other end is a standard 5-pin waterproof SeaTalk 2 type connector. Raymarine SeaTalk 2 / NMEA 2000 interface cable (1.5m)...
SKU: NVN-16537
MPN: E55053
UPC: 723193550533

Raymarine SeaTalk 2 / NMEA 2000 Interface Cable (1.5m)

Item no : 3465397972
sold recently : Login >>
US$ 53.89
Pay in 4 interest-free payments of $13.47 Learn more
Min. order: 1piece

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 24 - Jul 29

Enjoy 20% off shipping

US$ 53.89

1-11

US$ 48.50

12-35

US$ 37.72

36-59

US$ 32.33

60+

US$40

Get now

Sign up to your membership to get coupons up to

15%

Get now

Opportunity to enjoy order discount up to 15% off

Please add the products
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

recommand products

Related Searches