Apollo Cooling Coil. 

• This Cooling Coil will attach to the Apollo Lids. 
• The coil is constructed of stainless steel 8mm tubing. 
• To install, simply drill two holes in the expansion ports of your Apollo lid to accommodate the bulkheads of the cooling coil. 
• Insert the threaded bulkheads through the holes using the silicone o-rings to create a seal on the underside of the lid.
• The threaded bulkheads will protrude through the lid and can be held tight by the hex nuts on the exterior of the lid.
• Once positioned, the coils in the tank can be slightly separated to increase the contact area with the liquid.
• Coils are offset so they will not impeded the operation of the plunge valve or centralised floating liquid pick up tube of the Apollo vessels.

Dimensions:

Length - 540mm

Width - 40mm

Depth - 40mm