Specification:

100% brand new and high quality

Type: Battery Tattoo Machine Pen

Material: Aluminum

Size: approx 130 x 38 x 38 mm

Working Voltage: 5-12 v

Switch Frequency: 55-165Hz

Needle Protrusion: 0-4.5 mm

Stroke Length: 3.5mm(4.0mm stroke optional)

Feature:

This cartridge is CNC-Machined by aircraft Aluminium alloy and then anodized finish.

Non-slip handle design, lightweight and exquisite.

The motor parts can be disassembled and are replaceable

The advanced gear system guarantees reliability and quiet operation

Product parameters:

1. Material: aluminum alloy + acrylic, laser engraving;
2. Charging time: fast charging, 2-3 hours can be fully charged;
3. Using
time: Under normal 8V voltage, the voltage stable state can last for
more than 5 hours, long time working the voltage is stable;
4. LCD display content: output voltage range + battery usage
5. Lithium battery capacity: 1800 mAh capacity

Instructions for use:

The device is a tattoo power supply, with an input port, output port, built-in
lithium battery, external switch button, voltage adjustment button, LED screen, and specific functions are as follows:

1. Power on press and hold the middle O key for 5 seconds to power on, and then press and hold for 5 seconds to power off;

2. Pause: during normal work, press the O key for a short time to pause the work, and then press it to resume the work;

3. Adjust the voltage: pushing the "+" or "-" key to adjust the gear, corresponding to 1-8 gears respectively representing 5-12V;

4. Battery display: It is displayed on the screen, it is full of 4 cells,
and it needs to be charged when there is 1 cell remaining

Power parameters:

1. Input: The charging port is powered by a USB data cable.
The built-in battery is 3 pcs, 600mA / block, 3.7V battery, and the output current is fixed at 1A;
2. Output: Voltage range: (1-8 orange
corresponds to 5-12V) pushing "+" or " -" button to switch the voltage
range, 5V is the lowest voltage, and 1 level corresponds to 5V, 2nd gear
corresponds to 6V, and so on 8th gear corresponds to 12V;
3. Power storage: fast charge through
the matching fast charge USB data cable. Normally, it can be fully
charged in 1.5-2 hours. It is fully charged with 4 grids. It can be used
for about 5-6 hours when the 8V is turned on. The voltage is stable.
The last battery charge needs to be recharged to ensure the use time.