System Contains:
8 x Milo Array Loudspeakers
8 x Meyer Flightcases

ALL CABLES INCLUDED! 

*Please Note: This is a secondhand Bundle, in Excellent working condition!*

Meyer Sound MILO Powered Line Array Loudspeaker

MILO is a self-powered, four-way loudspeaker designed for vertical curvilinear arraying. It has ample power reserves (140dB SPL peak output at 1 meter) for high output level, longer throw applications in large venues, yet its weight and cabinet dimensions allow for its use in more compact spaces.

Features:

• Extremely high power-to-size ratio for lower costs and flexible installation
• Exceptional fidelity and peak capability assure clean, high-impact response
• Seamless integration with other M Series models
• QuickFly rigging system simplifies use in flown or ground-stacked arrays

Specifications:

• Acoustical
  • Operating Frequency Range: 60 Hz - 18 kHz
  • Free Field Frequency Response: 65 Hz - 17.5 kHz ±4 dB
  • Phase Response: 750 Hz - 16 kHz ±30°
  • Maximum Peak SPL: 140 dB @ 1 m
  • Dynamic Range: >110 dB
• Coverage
  • Horizontal Coverage: 90°
  • Vertical Coverage: Varies, depending on array length and configuration
• Crossover
  • 560 Hz, 4.2 kHz
• Transducers
  • Low/Low-Mid Frequency:
    • Two 12" cone drivers with neodymium magnets
    • Nominal impedance: 4 Ω
    • Voice coil size: 4"
    • Power-handling capability: 1200 W (AES)
  • Mid-High Frequency:
    • One 4" compression driver
    • Nominal impedance: 8 Ω
    • Voice coil size: 4"
    • Diaphragm size: 4"
    • Exit size: 1.5"
    • Power handling capability: 250 W (AES) on REM
  • Very-High Frequency:
    • Three 2" compression drivers
    • Nominal impedance: 12 Ω
    • Voice coil size: 2"
    • Diaphragm size: 2"
    • Exit size: 0.75"
    • Power handling capability: 100 W (AES)6 on REM
• Audio Input
  • Type: Differential, electronically balanced
  • Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient pro
  • Connectors: ±15 V DC, clamped to earth for voltage transient protection
  • Input Impedance: 10 kΩ differential between pins 2 and 3
  • Wiring:
    • Pin 1: Chassis/earth through 220 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies
    • Pin 2: Signal +
    • Pin 3: Signal -
    • Case: Earth ground and chassis
  • DC Blocking: None on output, DC blocked through signal processing
  • CMRR: >50 dB, typically 80 dB (50 Hz–500 Hz)
  • RF Filter:
    • Common mode: 425 kHz
    • Differential mode: 142 kHz
  • TIM Filter: Integral to signal processing (<80 kHz)
  • Nominal Input Sensitivity: 0 dBV (1 V rms, 1.4 V pk) continuous is typically the onset of limiting for noise and music
  • Input Level: Audio source must be capable of producing a minimum of +20 dBV (10 V rms, 14 V pk) into 600 Ω inorder to produce maximum peak SPL over the operating bandwidth of the loudspeaker
• Amplifiers
  • Type: Complementary power MOSFET output stages (class AB/H)
  • Output Power: 3935 W (four channels; three x 1125 W, one x 560 W)
  • THD, IM, TIM: <.02%
  • Load Capacity: 4 Ω low, low-mid and very-high channels; 8 Ω mid-high channel
  • Cooling: Forced air cooling, four fans (two ultrahigh-speed reserve fans)
• AC Power
  • Connector: 250 V AC NEMA L6-20 (twistlock) inlet, IEC 309 male inlet, or VEAM
  • Automatic Voltage Selection: Automatic, two ranges, each with high-low voltage tap
  • Safety Agency Rated Operating Range: 95 V AC – 125 V AC, 208 V AC - 235 V AC; 50/60 Hz
  • Turn-on and Turn-off Points: 85 V AC – 134 V AC; 165 V AC - 264 V AC
  • Current Draw:
    • Idle Current: 1.1 A rms (115 V AC);0.55 A rms (230 V AC);1.3 A rms (100 V AC)
    • Max Long-Term Continuous Current (>10 sec): 11.2 A rms (115 V AC);5.6 A rms (230 V AC);12.9 A rms (100 V AC)
    • Burst Current (<1 sec): 14.4 A rms (115 V AC);7.2 A rms (230 V AC);16.6 A rms (100 V AC)
    • Ultimate Short-Term Peak Current Draw: 32 A pk (115 V AC);16 A pk (230 V AC);37 A pk (100 V AC)
    • Inrush Current: 7 A (115 V AC and 110 V AC); 10 A (230 V AC)
• RMS Network
  • Equipped for two conductor twisted-pair network, reporting all operating parameters ofamplifiers to system operator’s host computer.
• Physical
  • Dimensions:
    • 54.00" W x 14.47" H x 22.00" D
    • (1372 mm x 368 mm x 559 mm)
  • Weight: 235 lbs (106.60 kg)
  • Enclosure: Multi-ply hardwood
  • Finish: Black textured
  • Protective Grille: Powder-coated hex stamped steel
  • Rigging: MRF-MILO rigging frame, custom AlignaLink connectors and quick release pins