A good bath faucet is essential in any bathroom. From washing hands to showering, the high-quality DENVER bath mixer with a matte black finish from SCHÜTTE is the perfect choice.

Each bathroom faucet features a low-noise, replaceable ceramic cartridge. The solid brass construction also makes this faucet exceptionally durable.

This product includes a shower hose connection, making the SCHÜTTE bath mixer easy to install.

• Color: matte black
• Material: brass
• Dimensions: 14.5 x 18.2 x 10.3 cm (W x D x H)
• Bath mixer tap with ceramic cartridge
• Shower hose connection diameter: ½" (Ø approx. 1.9 cm)
• Low-noise, replaceable 35 mm cartridge
• Metal handle

Safety Information · Have installation carried out only by qualified personnel. · WARNING: WATER DAMAGE! Turn off the water supply before installation. · Ensure all gaskets are the correct size. · These taps are not suitable for low-pressure use or for small electric water heaters. · We recommend installing a filter in the appliance, or at least using angle valves with a filter, to prevent the ingress of foreign materials that could damage the cartridge. · This tap is intended for domestic use only! Suitable only for use in rooms with a temperature above 0°C. If there is a risk of frost, turn off the water supply and drain the tap. · BE CAREFUL when using hot water. Danger of burns! · Incorrectly installed connections can cause water damage! · Ensure that the connection hoses do not come into contact with caustic or corrosive products, such as dishwashing liquid or household cleaners, as this can cause water damage. · Despite careful manufacturing, this product may have sharp edges. Be careful! Drainage Your sink faucet is delivered in solid packaging to protect it from transport damage. The packaging is made of recyclable materials. Please dispose of it in an environmentally friendly manner. Do not dispose of the product with residual waste at the end of its life. Ask your local authority about environmentally friendly disposal options. Technical specifications · Flow pressure: recommended as 1.5 to 6 bar. For a connection pressure exceeding 6 bar, we recommend installing a pressure reducer. · Water temperature: max. 80°C. Installation instructions · Tighten the connection hoses by hand only. Do not use pliers or a wrench! · After installing the faucet, loosen the spray nozzle. Then let the hose and tap run for a while to flush away any contamination and residue. · Do not twist or apply tension to the hoses! Before using for the first time, check that all connections are tight! · After using for the first time, thoroughly check all connections to ensure they are securely fastened. · We do not offer any warranty for improper installation and any resulting damage! Care Instructions: Sanitary taps require special care. Therefore, please follow these instructions: · Chrome-plated surfaces are sensitive to limescale removers, acidic cleaning agents, and all types of abrasives. · Never clean colored surfaces with abrasive, corrosive, or alcohol-based agents. · Clean your taps only with clean water and a soft cloth or chamois. · Do not allow any cleaning agent to enter the cartridge housing, as this can cause the lever to become stiff and noisy. Remember to unscrew the spray nozzle regularly to remove any limescale and foreign matter. In case of severe contamination, it is recommended to replace the nozzle. Maintenance: A cartridge is a replaceable part and may need to be replaced every 1-2 years if the water contains a lot of limescale or dirt. Illustrated instructions for replacing the cartridge can be found on our website via this link: web.fjschuette.de/Austausch_Kartusche-Ventiloberteil.pdf. Regularly check all connections for leaks and visible damage. If leaks or visible damage to the fitting or connection hoses are found, they must be checked immediately by a professional and replaced if necessary. Disassembly: Turn off the water supply before disassembling the product. Pay attention to the outflow of residual water. Disassemble the product following the assembly instructions in reverse order. The illustrations are for illustrative purposes only; the actual product may differ from the illustrations. Subject to technical modifications. Warranty Card: Franz Joseph Schütte GmbH, located in Wallenhorst, offers a manufacturer's warranty for the product you purchased in accordance with the warranty conditions listed below. Your statutory warranty based on the purchase contract with the seller and your statutory rights are not affected by this warranty. Warranty Conditions: 1. Scope of Warranty: Franz Joseph Schütte GmbH warrants the proper material quality and workmanship in accordance with the intended purpose, as well as the professional installation, tightness, and function of the single-knob mixing technology. The warranty is only valid in the country in which the product was purchased. The warranty also includes a 1-year warranty on the durability of non-high-gloss chrome-plated surfaces, such as bronzed or colored surfaces. The following are not covered by the warranty: · Corrosion of the nozzle (aerator) · Cartridge · Damage due to incorrect installation, incorrect application, and incorrect use · Damage due to external influences such as fire, water, and chemical influences · Mechanical damage caused by accidents, falls, or other impacts. · Negligence or intentional destruction. · Normal wear and tear or poor maintenance. · Damage due to repairs by an unauthorized person. · Improper handling, insufficient maintenance, and the use of unsuitable cleaning agents. · Chemical or mechanical influences during transport, storage, connection, repairs, and use of the product. 2. Warranty Service The warranty covers, at our discretion, free repairs or free delivery of spare parts or a product of the same quality upon return of the defective part or product. If the model in question is no longer produced, we reserve the right to select a replacement product from our range that is most comparable to the returned model. Replaced products and parts become our property. Upon returning the product, the purchaser bears the costs and risks of transport, unless this is a warranty situation in accordance with the statutory warranty regulations. In the latter case, we will reimburse the transport costs. Reimbursement of costs for disassembly and assembly, inspection, and claims relating to lost profits and damage are excluded from the warranty, as are any further claims relating to damage and losses of any kind caused by the product or its use. 3. Submitting a Warranty Claim The warranty claim must be submitted, along with the original proof of purchase, within the warranty period to Franz Joseph Schütte GmbH, Hullerweg 1, 49134 Wallenhorst. 4. Warranty Period The warranty period is always the period stated on the label or packaging of each individual product. If no specific warranty is stated for a specific product, the warranty period is always 2 years from the date of purchase, with the date on the proof of purchase being binding. Exception: The durability of non-high-gloss chrome-plated surfaces, such as bronzed or colored surfaces; for this, the warranty period is 1 year from the date of purchase. The date on the proof of purchase is also binding. The warranty period for the product will not be extended or renewed through warranty services. 5. German law applies to this warranty, to the exclusion of the United Nations Convention on Contracts for the International Sale of Goods (CISG). 6. Severability Clause Should any of the provisions in the guidelines be or be rendered ineffective, in whole or in part, or should the parties inadvertently fail to create a guideline with respect to a situation in this contract, the validity of the other provisions in this contract shall remain unaffected. In place of the ineffective or inapplicable provision, or in place of the gap in the contract, an effective or applicable provision shall be inserted that comes closest to the intent and purpose of the ineffective or inapplicable provision. In the event of a gap, the provision must be agreed upon that corresponds to what would have been agreed upon, in accordance with the intent and purpose of this contract, if the parties had considered this situation from the outset. This also applies if the ineffectiveness of a provision is based on a degree of performance or time that is standardized in this contract. In such cases, the agreed-upon degree will be replaced with a legally permitted degree of performance or time that comes as close as possible to the agreed-upon degree. This warranty card is only valid in conjunction with the original proof of purchase.