Fusor® 123EZ/126EZ sealer is a two-component, epoxy-based seam sealer used for duplicating factory appearance on truck bed, tooled door skin, floor pan, and core support seams. Fusor 123EZ/126EZ is used in applications which require a non-sag cosmetic seam sealer with longer work time.

Fusor 123EZ = 10.1 oz (300 mL)
Fuosr 126EZ = 1.7 oz (50 mL)

Shelf Life
Shelf life is 24 months from date of manufacture when stored at 75°F (24°C) in original, unopened container.

Substrates
Apply over 2K primers; Epoxy 2K chemistry

OEM Approvals
• GM, Ford: Collision/warranty repair
• Honda, Acura: Collision repair

Features and Benefits
Versatile – bonds to epoxy or urethane primed surfaces; weld through with minimal burn back.

Excellent Appearance – easily duplicates factory appearance; provides extremely flexible seal with no shrinkage, cracking or sagging.

Environmentally Resistant – provides excellent corrosion protection.

Easy to Finish - can be tooled, wiped clean, sanded and/or painted.

Applications
Duplicating factory look on the following seams: truck beds, tooled door skin, floor pan, core support and any other application in which a non-sag cosmetic seam sealer is required and where longer work time is desired.

Typical Properties*
Appearance Blue Liquid
Base Chemistry Epoxy
Work Time 10 minutes @ 70°F (21°C)
5 minutes @ 90°F (32°C)
Sand Time 30 minutes @ 70°F (21°C)
Paint Time 30 minutes @ 70°F (21°C)
Full Cure 24 hours @ 70°F (21°C)