Brewzilla GEN3 Replacement Pump 6 Watt.

• This magnetic drive pump is the ideal pump for your brewing system needs.
• Capable of withstanding temperatures up to 120C it can handle the boil directly without the need to cool before use.
• Extremely efficient 1.1amp pump which can be run continuously at elevated temperatures.

• A 1/2" ball valve is recommended on the outlet side to reduce the flow if you're using this for brewing purposes and don't want full flow.
• Putting pressure by restrictive flow will not hurt a magnetically driven pump, it is precisely what it is made for.

• It is not self priming, so it will need to be lower than the vessel primed with liquid before it can push it around.
• It is not submersible!

• This magnetic drive pump is the ideal pump is the same one that we use in the Brewzilla 35L and 65L
• Capable of withstanding temperatures up to 120C it can handle the boil directly without the need to cool before use.
• Extremely efficient well under 1 amp this pump can be run continuously at elevated temperatures. 
• The input and output of the pump are 14mm OD so this will allow you to hook up silicone hose directly to the pump and secure with a hose clamp.

• This pump is not self priming, so it will need to be lower than the vessel primed with liquid before it can push it around. It is not submersible!

• This pump also comes un-wired.  So it's ready to install into your own brewery or replace the Brewzilla / Robobrew pump if you need to for some reason.

• Voltage: 220-240 at 50-60hz
• Specifications: Max Head: 2.1m(at 240v)
• Specifications: Max Flow: 12L/min )at 240v)
• Input and Output size: 14mm OD (to suit hose with ID 11-13mm)

• We recommend to not run the pump dry for too long as it may impede future performance.