Hall Technologies HBX-S HDMI Video Extender Sender

This product is a Class A HDBaseT compliant Sender (Transmitter) that supports 100meter Cat6 range and is used to extend HDMI, RS-232, IR, and Ethernet (100BaseT) up to 100 meters (328 feet) using a single Cat6 cable.

Since the product uses the HDBaseT standard, video is extended pixel-by-pixel with no compression or latency. The extender supports all PC and HDTV Resolutions including 4K @ 30 Hz 4:4:4 or 4K @ 60 Hz 4:2:0. The IR extension preserves the modulation (carrier) frequency thereby providing compatibility to most standards.

The HBX-S includes a universal 5v power supply. IR emitter and IR detector cables are also included.

Key Features

• Fully Compliant with HDBaseT standard
• Supports virtually all HDMI and DVI resolutions including 4K UHD
• Extends, Video, Audio, RS-232, IR, and Ethernet
• Supports extension to 100 m (330 ft)
• Fully isolates grounds between TX and RX sides
• Compact, Rugged, Reliable, and Economical
• Plug and play, no configuration needed
• Receiver can be powered via PoC from senders that provide PoC such as HSM-44-BX Matrix Switch with HDBaseT outputs

Technical Specifications

Video Standards
DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including
12 bit color depth, 3D video and 4K support)
Signal Type
TMDS
Resolutions
DVI signal - VGA (640x480) thru WUXGA (1920x1200)
HDTV signal - 480i through 1080p
Digital Cinema - 4K30 4:4:4 or 4K60 4:2:0 (4096x2160) up to 60 m
Audio Formats
All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD
Master Audio (32-192 kHz sample rate)
DDC
Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP
handshake
CEC
Pass-Thru CEC for Consumer Electronics Control compatible devices
RS232
Bidirectional (full-duplex) any baud rate up to 115,200
Ethernet
100BaseT Ethernet LAN
IR
Extended in both directions. Carrier modulation range from 30 kHz to 60 kHz
Power Supply
100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 2 A, regulated
Power
Sender & Receiver: 10 watts maximum
Temp/humidity
Storage: -40 to +158 F (-40 to +70 C) / 10% to 90%, non-condensing
Operating: +32 to +122 F (0 to +50 C) / 10% to 90%, non-condensing
Cooling
Convection
Mounting
End plates with hole for surface mounting
Enclosure type
Metal (Aluminum ends, Aluminum Extrusion)
Dimensions
1.0" H x 3.9" W x 3.9" D (25mm H x 100mm W x 100mm D)
Depth excludes connectors
Product weight
Sender 9.3 oz (0.58 lb or 264 g)
Receiver 10 oz (0.63 lb or 284 g)
Kit (shipping) 37 oz (2.3 lb or 1050 g) includes: sender, receiver, universal power supply, manual, and packaging
Safety
CE
EMI/EMC
CE, FCC Class A
MTBF
90,000 hours (Calculated Estimate)
Warranty
3 years parts and labor