Shopping security
Imagine navigating through fog-shrouded waters or monitoring distant squalls while keeping a sharp eye on nearby buoys and vessels—all without the hassle of long warm-ups or excessive power draw. The Simrad HALO-3 pulse compression radar transforms how recreational boaters approach safety and performance. By blending the long-range punch of traditional pulse systems with the razor-sharp clarity of broadband tech, it delivers reliable detection from intimate 10-meter close-ups to impressive 48-nautical-mile horizons. Solid-state design ensures it's always ready when you are, cutting startup times dramatically and slashing maintenance worries.
Crafted for smaller powerboats and yachts, this radar stands out with its eco-friendly low emissions, making it suitable even in crowded marinas. Mariners praise its intuitive modes that adapt to real-world conditions, from bustling harbors to open ocean passages, providing clutter-free images that boost confidence during night runs or heavy weather.
At its core, pulse compression sends clever frequency-swept bursts at just 25W, mimicking high-power radars without the bulky magnetron. This means no tuning drift, no replacements, and instant reliability. Directional clutter rejection pulls small targets from sea noise, while sector blanking hides fixed obstacles like docks. In practice, boaters report spotting pot buoys amid waves or flocks indicating bait balls—details that elevate fishing trips and coastal cruises.
The 3-foot array punches above its size, offering a 10m minimum range that peers into blind spots. High-speed modes deliver fluid sweeps, ideal for dynamic scenarios like maneuvering in traffic or chasing game fish. Winds up to 70 knots? It keeps spinning smoothly thanks to helical gears and solid-state drive.
Switch effortlessly: Harbor mode cuts city clutter, Offshore handles chop, Weather pierces rain, Bird reveals schools indirectly. Auto-detection between harbor/offshore saves fiddling, and Custom lets pros dial in perfection.
Everything arrives ready: pedestal, 3' antenna, RI-12 interface, and 20m cable. Mount the slim array topside, tuck the interface below deck, and Ethernet-connect to your display. Low 7W standby draw preserves batteries on long anchors. Built tough—no brushes to wear, no tubes to burn out—it thrives in harsh marine environments, from salty air to pounding wakes.
Low emissions align with evolving regs, letting you scan safely near swimmers or tenders. Power efficiency shines on mid-sized vessels, freeing juice for lights, fishfinders, or autopilots.
| Category | Specification |
|---|---|
| Antenna Specs | |
| Size | 44.37 inches |
| Range | 48 nm |
| Rotation Speed | 24-48 RPM (min 20 RPM at 70 knots) |
| Horizontal Beam Width | 2.4° (±10%) sharpened to 1.7° |
| Vertical Beam Width | 25° (±20%) |
| Transmitter Frequency | 9.410-9.495 GHz (X-Band) |
| Peak Output | 25W (±10%) |
| Power & Environmental | |
| Input Voltage | 10.8-31.2 VDC (12/24V) |
| Power Draw | 40W avg (no wind), 150W peak, 6.5W standby |
| Operating Temp | -13°F to 131°F |
| Connectivity | Ethernet, NMEA 2000/0183 via RI-12 |
Simrad HALO 3 Radar with 3' Array
Model: 000-11469-001Solid-State with Pulse Compression Technology
Simrad Halo Radar is the world’s first high performance, solid-state radar with pulse compression technology designed specifically for recreational mariners. Unlike traditional pulse radar, Halo Radar isn’t reliant on a high-powered magnetron (vacuum tube) to transmit. Instead, Halo Radar uses solid-state electronics and low-power 25W pulsed, frequency-swept transmission bursts to deliver pulse radar-like range and resolution, without the associated warm-up time, power consumption, or electromagnetic emissions.
48nm Range
Halo Radar delivers a maximum range comparable to traditional 6kW pulse radar, at up to 48nm with the HALO-3 Radar’s 3-foot open array antenna. It offers unprecedented 10m (30ft) minimum range, peering into that pulse-radar blind spot where once only FMCW (3G/4G) Broadband Radar could operate.
Beam Sharpening
Whether you’re looking at a flock of birds or a string of channel markers, separating one radar target from another is key. Beam Sharpening with Target Separation Control provides unmatched target resolution, granting the Halo Pulse Compression Radar’s 3-foot open array antenna the same effective target resolution as a 4-foot array without beam sharpening.
Dual Range Operation
With Dual Range, Halo Radar functions like two arrays in one — monitor two distance ranges simultaneously with independent displays, controls, and totally independent MARPA target tracking. Take full advantage of Halo Radar’s combination of short-, mid-, and long-range performance to keep an eye on faraway weather cells, while monitoring channel markers and high speed watercraft up close. Dual Range operation is available with Simrad NSS and NSO multifunction display systems.
Target Detection
The HALO-3 Radar offers excellent target detection for its compact 3-foot open array. For enhanced target detection in line with tough IEC 62388 Annex D specifications, consider our larger HALO-4 Radar or HALO-6 Radar arrays.
MARPA Target Tracking
Automatically track up to 10 user-selected radar targets, displaying CPA (closest point of approach) and TCPA (time to closest point of approach). Up to 20 different targets can be tracked in Dual Range mode, with 10 targets per screen. MARPA functionality requires a heading sensor and GPS.
Advanced Signal Processing
Halo Radar employs advanced signal processing for digital azimuth and range sidelobe reduction, enhancing discrimination of small targets such as channel markers from larger adjacent targets such as ships and bridges. In addition, Directional Sea Clutter Rejection dynamically changes gain in the sweep to allow smaller targets to be seen in the leeward. Sector Blanking eliminates unwanted reflections, for less clutter on screen.
8 Usage Modes with Automatic Harbour/Offshore Selection
Harbour, Offshore, Weather, and Bird modes tune Halo Radar’s advanced signal processing to help ensure the targets you’re interested in can be seen vividly — even in the toughest environmental conditions. Automatic selection of Harbour and Offshore modes configures your Halo Radar to suit your surroundings, while a ‘Custom’ mode enables easy manual tuning to suit any purpose or condition
High Speed Mode Halo Pulse Compression Radar provides rapid position updates, with high speed operation up to 48RPM (mode and range dependent). Simrad quality construction and Halo Radar's brushless motor with advanced helical geartrain design ensure exceptionally quiet operation, especially at 48RPM.
InstantOn™
Collision hazards won’t wait for your radar to start up — why should you? Halo Radar’s solid-state technology is ready instantly from standby, and in just 16-25 seconds from power-on to fully-operational. Avoid the 2-3 minute warm-up time associated with traditional pulse radar, and trust Halo Radar to produce an immediate, accurate radar image when you need it.
High Reliability
Halo Radar is built to last, with its solid-state transceiver meaning no magnetron to replace, and no manual tuning required as the magnetron heats up or ages. Similarly, a solid-state brushless motor driver means no motor brushes to wear out and replace. Be confident that Halo Radar will operate at high speed in winds up to 70 knots, year after year.
Low Electromagnetic Emissions
Unlike traditional pulse radar, Halo Radar’s low-power pulsed transmissions meet upcoming Low Emission standards. This makes Halo Radar safe to run in anchorages and marinas, providing enhanced radar coverage at the very start and end of each journey.
Low Power Consumption Halo Radar uses 40W average with no wind, and no more than 200W at maximum wind velocity. Experience even greater power savings in standby with just 7W power usage, versus 10/15W for pulse radar. With its low power consumption and support for 12/24 volt DC systems, Halo Radar is ideal for small to mid-sized powerboats.
Ethernet Connectivity
Simrad Halo Pulse Compression Radar connects to any Simrad NSS or NSO multifunction display system via Ethernet, with a bulkhead-mounted interface box below deck. Antenna installation is simple and elegant, with the same thin cable and small-diameter connectors as our 3G/4G Broadband radars.
Uncompromising Aesthetics
Bringing the range and reliability of Halo Pulse Compression Radar to your boat doesn’t mean compromising on aesthetics. Halo Radar’s sleek open-array antenna sits atop a uniquely curved pedestal, a departure from traditional boxy and utilitarian radar designs. Display your Halo Radar on the water with soft-glow, dual-beam Blue LED accent lighting, integrated into the pedestal and customizable with 4-level brightness control.
* Halo™ Pulse Compression Radar’s blue 4 level static accent pedestal lighting may not be approved for use in your boating location. Please check your local boating regulations before turning the blue accent lights ON.
* Halo™ Pulse Compression Radar’s blue 4 level static accent pedestal lighting may not be approved for use in your boating location. Please check your local boating regulations before turning the blue accent lights ON.
Specifications| Antenna | |
| Size | 44.37" |
| Range | 48nm |
| Rotation | Approx. 24 to 48 rpm (Min 20 rpm at Max 70 kts). Software controlled in modes |
| Beam width | 3 ft: 2.4°+/-10% (-3 dB width) — 1.7 deg with Beam sharpening mode ON |
| Beam width verticle | 25° +/-20 % (-3 dB width) |
| Plane of polarization | Horizontal Polarization |
| Side Lobe | Below -23 dB max. (within ±10°): Below —30 dB max. (outside ±10°) |
| Transmitter frequency | Synthesized - Upper half of X-Band 9.410 - 9.495 GHz |
| Peak power output | 25 W ± 10% under any transmit condition — up to 10% duty cycle max |
| Pulse length/PRF and compression ratio | Pulse length: 0.04 usec: Chirp length:2-96 usec: Chirp Bandwidth: 2-32 MHz: Up to 1 pulse and 5 chirps in a burst with burst repetition rate of 500-2000. Range and mode dependent. Effective Pulse Compression Ratio less than 150 in all modes. |
| Duplexer | Circulator and isolator |
| SART/RACON Triggering | Yes — trigger distance: about 1nm max — weather, sea state, and SART position dependent |
| Mixer | MIC front-end |
| IF section | Center frequency: 28.625 MHz: Bandwidth: 40 MHz max.* A/D; 16 bit 115 MSPS *Narrower bandwidths defined by signal processing |
| Noise Figure | 5 dB (Average) at front-end input. |
| Other | |
| Communication ports | Ethernet 10/100 Base-T for radar data and control, Micro-C male / NMEA2000 via RI-12 |
| NMEA 2000 PGNS used | 127250 - Vessel Heading, 127251 - Rate of Turn, 129025 - Position, Rapid Update, 129026 - COG & SOG, Rapid Update, 129029 - GNSS Position Data, 130818 -Proprietary |
| NMEA0183 | Input via RI-12: Sentenses used by the radar application. HDG, HDT, HDM, GGA, GLL, RMC, VTG.:Baud rate: Auto sense 4800, 9600, 19200 or 38400 |
| Antenna Park | Yes |
| Remote power on | Yes |
| Motor | Brushless with solid state commutation with electromagnetic braking for parking. |
| Operating temperature | 25°C to +55°C (-13°F - 131°F) |
| Input Voltage | R-12: 10.8 V DC to 31.2 V DC (12/24 volt systems), Pedestal voltage input is 36 V DC nominal generated by RI-12 |
| Input Draw | 150 W (peak) at maximum wind velocity, 40 W (average) at zero wind velocity, 6.5 W (average) for Scanner + RI-12 in Standby mode |
Ships within 48 hours · Estimated delivery Aug 11 - Aug 16
US$40
Get nowSign up to your membership to get coupons up to
15%
Get nowOpportunity to enjoy order discount up to 15% off
Top-Converting Item to Boost Your Average Order