Magigoo Pro Metal was developed as a professional first coat adhesive for BASF Ultrafuse^® 316L. Magigoo Metal is non-hazardous, non-flammable and also approved for use in the post-processing of BASF Ultrafuse^® 316L. Magigoo Metal also allows easy removal of the green parts from the build plate.

WHY:BASF Ultrafuse 316L enables the production of solid 316L stainless steel parts through the use of desktop FDM 3D printers and a sintering process. Ultrafuse^® 316L filament consists of highly refined metal particles embedded in thermoplastic binders. As a filament, the metal-polymer composite therefore poses none of the labour and safety risks associated with handling fine metal powders. This enables affordable, straightforward and safe 3D printing of stainless steel parts.Due to the thermoplastic nature of the filament binder materials and the differential thermal cooling during FDM printing, parts printed with BASF Ultrafuse^® 316L are prone to deformation. Due to the delicate nature of the green part, care must be taken when removing parts printed with BASF Ultrafuse^® 316L to avoid deforming the part. Magigoo Metal provides safe and reliable adhesion during printing and allows easy removal of the printed part by immersion in water, avoiding possible damage to the green part.HOW:A build plate temperature of 95-105 °C is recommended for the use of Magigoo Metal with BASF Ultrafuse^® 316L, however printing conditions may vary from printer to printer.

Using this product with filaments other than BASF Ultrafuse 316L may cause excessive adhesion and damage your surface. Follow the instructions in the technical data sheet to achieve the best results.