Starlink Gen 3 (V4) Tin Roof Mount Kit - Standard Aluminium Pole Adapter Included

These are to suit the V4 Rectangle Gen 3 Dish - Australian Made. 

The Spacetek Tin Roof Mount Kit is engineered for fixed installation of the Starlink Gen 3 (V4) rectangular terminal on corrugated roofing. The system provides a rigid, elevated mounting point while maintaining separation from the roof surface to reduce radiant heat exposure and improve airflow around the terminal.

This bundle inlcudes our standard powder coated Gen 3 aluminium adaptor.  For higher resistance to weather, you can consider our Starlink Heavy Duty Tin Roof Kit for Gen 3 (V4). 

Kit Inclusions: 

• 1 x Gen 3 Aluminium Pole Adator & Grub Screws - Standard Aluminium
• 2 x Structural Stay Bars 
  
• 1 x Aluminium Base Plate (270mm x 75mm)
• 1 x Aluminium Pole Mast (choice of length) 
• Generic Fixings Pack (please check suitability for your specific install) 

Note 💡 :  Our mounting kits do not come with a Starlink Dish, which can be purchased from Starlink.com or major retailers. 

Starlink Gen 3 terminals incorporate a thermal protection shut-off at approximately 50°C. The elevated pole design intentionally spaces the dish away from heat radiating from metal roofing during Australian summer conditions, reducing thermal load and helping maintain uninterrupted operation.

The kit includes a lite-duty Starlink Compatible Gen 3 pole adapter designed to interface directly with the Starlink V4 mast.

Extended pole height options are available to improve obstruction clearance and allow additional equipment (such as secondary antennas or Wi-Fi hardware) to be mounted beneath the terminal where required.

Key Features

✅ Gen 3 (V4) Compatibility - Designed specifically for the Starlink Gen 3 rectangular terminal and mast interface.

✅ Corrugated Metal Roof Design - Geometry suited to metal roofing profiles commonly used on Australian homes and sheds.

✅ Heat & Airflow Clearance - Elevated mounting height reduces exposure to roof radiated heat during high-temperature conditions.

✅ Lite Duty Pole Adapter Included - Precision-machined adapter ensures correct mast alignment and secure retention.

✅ Extended Height Options - Longer variants provide improved line-of-sight and space for secondary antennas or accessories.

Installation Overview

Installation reference Video:
A step-by-step tripod erection and mounting process is demonstrated in the official installation video (Gen 2 terminal shown for method reference only). Use the same procedure for Gen 3 with the supplied adapter.

1. Identify a structurally sound roof location with clear sky visibility.

2. Position the mount over roof battens or structural members.

3. Mark and pre-drill fixing points as required.

4. Apply suitable roofing sealant to all penetration points.

5. Secure the mount using roof-rated fasteners.

6. Attach the Gen 3 terminal to the supplied pole adapter.

7. Set orientation and tighten the supplied grub screw.

8. Fine-tune alignment using the Starlink App.

Important Notes

⚠️ Not suitable for ground, freestanding, or portable installation.
⚠️ Roof penetrations must be sealed to prevent water ingress.
⚠️ Ensure installation is performed on structurally sound roofing only.
⚠️ Professional installation is recommended for rooftop applications.