ALL GAS INTAKES ARE MADE TO ORDER!

can take up to 4-5 weeks depending on back log.

please be aware of this before ordering, these intakes are hand made in Canada!!

Introducing our take on the B9 EA839 intake for the 2.9T/3.0T

We're proud to announce our entry into the B9 world with none other than our signature titanium intake system. Available in multiple finishes, this kit will make your 2.9T/3.0T sound and perform excellent!

The B9 V6T is a relatively muted vehicle from the factory. Our intake system will finally allow your engine to breath properly, unleashing the glorious spool & blow off sounds that are characteristic of a turbocharged car.

This intake is compatible with the stock 2.75" turbo inlet and aftermarket 3.5" turbo inlets!!!

Titanium... why?

When developing our B9 intake, we knew we had some choices in front of us. The decision to go with CP1 titanium was not one we took lightly. Titanium is not a cheap material to work with, but ignoring the benefits of this aerospace material was not something we could overlook.

Titanium is what we like to call "functionally beautiful". Aside from being one of the most lightweight metals available, titanium has a very low heat transfer rate (16 W/m-K) compared to aluminum (152 W/m K), which means it is highly resistant to heat transfer from the engine bay. Intake temperatures play a key role in power production in turbocharged engines. For this reason, we opted to go straight to the source by choosing a material that will naturally keep intake temps down.

In addition to its excellent thermal properties, titanium has a much higher strength-to-weight ratio, meaning that much thinner tubing can be used in our intakes. This means larger internal diameters when compared to aluminum with the same outer diameter. Our 3.5" titanium intake, as a result, boasts a 5% increase in intake area when compared to a 3.5" aluminum intake. A higher strength-to-weight ratio also means lighter parts. The increased rigidity also means that sound control is minimal. Your supercharger whine is finally given the glory it deserves!

Titanium Grade 4, also known as titanium CP1, is the strongest of all commercially pure titanium grades. It combines excellent corrosion resistance with good strength and toughness. This means that your intake will continue to look beautiful well past your engine's expiration date. The lack of paint or powder coating also ensures that the finish will hold up for the long run! Occasional cleaning is all that's required.

Last, but certainly not least, titanium is just plain gorgeous to look at. If you're looking for something to make your engine bay stand out in a crowd or at your local car show, you will not find a nicer piece. When aluminum just won't do, this is the intake for you.

Features:

• Extremely lightweight
  
• Pie cut from 100% CP1 grade titanium, hand TIG welded, and back-purged for longevity
  
• Pairs perfectly with stock or upgraded turbo inlet pipes
• Audible turbo/diverter valve sound outside & in the cabin

Includes:

• Titanium intake tube
• 4-ply reinforced silicone inlet pipe coupler to suit your turbo inlet
• All required hardware
• High-flow 3.5" cone filter
• Heat shield/air guide