12 volt 1100 GPH 3.7 amp Automatic. RULE Model 27DA

Next generation compact submersible 1100 GPH Automatic Sensing electric bilge pump - no float switch required. Totally submersible pump with water cooled, ignition and TCO protected motor, stainless steel shaft and snap-on strainer base. These pumps are extremely efficient, draw low current and offers high capacity output in a very compact housing, to fi t into the smallest available space. Please note - using the included check valve will reduce the output fl ow of the pump. Consumes only 0.25 amps per day. 12v or 24v DC only - Cannot be run through 240v transformers. Available in 12 & 24 volt models. 3 year limited warranty.

3 year limited warranty.

• Fully submersible pump - 1100 US gallons per hour - 69 litres per minute
• Higher flow - optimised impeller to provide greater flow at the same amperage as previous model
• High effi ciency, low amp draw ignition protected motor includes true Electromagnetic suppression (EMC)
• 16 gauge tin coated copper electrical wiring with silicone infused water blocking feature - to stop water wicking down inside the wiring
• Built-In thermal cut-out (TCO) in the motor provides additional protection for pump & vessel
• Backflow prevention - now includes a removable check valve in the discharge nozzle which reduces the amount of water draining back from the pump discharge hose into the bilge.
• Please note - using the check valve will reduce the rated output fl ow.
• Threaded discharge port - gives easier installation and maintenance. Discharge hose port is included with each pump
• Hidden air vents in the pump prevent air locking in challenging plumbing installations and helps with the check valve operation
• Compact - 120mm Height x 74mm Width x 64mm depth - not incl. discharge
• 3.7 amp draw @ 12v DC. 1.8 amp @24v. Consumes only 0.25 amps per day.
• Threaded hose outlets supplied for both 25mm (1”) and 28mm (1 1/8”) hose.