034Motorsport is proud to offer the ultimate rear sway bar upgrade for the Audi 8J/8P TT/TTS/TTRS & Audi A3/S3/RS3 and MkV/MkVI Volkswagen R32 & Golf R! The 034Motorsport Adjustable Solid Rear Sway Bar is made from high-quality spring steel for maximum rigidity, and is designed to combat understeer while reducing body roll under hard cornering.

This product was tested thoroughly on the street and track on both the 034Motorsport Audi TT RS 2.5 TFSI and Nate@034's Audi A3 before release. The 034Motorsport Adjustable Solid Rear Sway Bar substantially reduces understeer and body roll on the Audi 8J/8P and MkV/MkVI Volkswagen R32 & Golf R without compromising comfort on the street.

In addition, the 034Motorsport Rear Sway Bar is engineered to be used effectively with the stock front sway bar. No upgrade in the front is needed or required. The addition of a stiffer front bar introduces even more push, requiring an even bigger bar in the back.  With the stock front sway bar and upgraded 034Motorsport Solid Rear Sway Bar, body roll is virtually eliminated while turn in and off throttle oversteer are greatly improved.

The sway bar rate is adjustable via the adjustment holes. The two holes closest to the MOI of the bar are the "stiff" (423% stiffer than stock) setting, and the two holes farther out are the "soft" (362% stiffer than stock) setting.

034Motorsport Sway Bar Kits feature maintenance-free polyurethane bushings with a Teflon and polyester liner designed to enhance sway bar response speed while minimizing noise, vibration, and harshness (NVH). This liner also results in an extended service life that allows these bushings to even outlast your vehicle. With no need for additional lubrication, these bushings offer reliable, long-lasting performance without the hassle of regular maintenance and greasing. Built to withstand extreme conditions, the bushings are hydrophobic, heat-resistant up to 500°F, and resistant to water and common automotive chemicals. These bushings are covered by a limited lifetime warranty which covers material cracking, separation of the Teflon liner and polyurethane bushing, or squeaking under normal street or track conditions.

Features:
- Adjustable - 362% or 423% Increased Sway Bar Rate vs. Stock TT RS Rear Sway Bar
- 22.25mm Diameter
- Solid Spring Steel Construction
- 2-Hole Adjustable
- Designed to be used in conjunction with the stock front sway bar.
- Greaseless, Maintenance Free, Teflon Lined Polyurethane Bushings
    - Teflon and Polyester Composition Liner That Virtually Eliminates Noise, Vibration and Harshness (NVH).
    - Improves Sway Bar Response Speed
    - Extended Service Life
    - No Additional Lubricant Needed, and Should Not Be Added
    - Hydrophobic and Waterproof, Will Not Absorb Water or Be Affected In Even The Wettest Environments
    - Is Not Chemically Reactive and Will Not Be Affected By Common Chemicals Present In The Automotive Environment
    - Heat Resistant, Can Operate Continuously At Temperature Up to 500°F, Much Higher Than What Any Bushing Would See
    - Limited Lifetime Warranty, Covering Manufacture Defects:
        - Material Cracking
        - Separation Of Teflon Liner and Polyurethane Bushing
        - Squeaking Under Normal (Street/Track) Conditions.

What's Included:
- 034Motorsport Adjustable Solid Rear Sway Bar
- Teflon Lined Polyurethane Sway Bar Bushings
- Billet Aluminum Sway Bar Brackets
- Sway Bar Retaining Clips

Fitment:
- 2010 - 2013 Audi TT RS 2.5 TFSI (8J)
- 2011 - 2013 Audi RS3 2.5 TFSI (8P)
- 2006 - 2013 Audi TT/TTS Quattro (8J)
    Except 3.2L VR6 Models
- 2006 - 2013 Audi A3/S3 Quattro (8P)
- 2008 Volkswagen R32 (MkV)
- 2012 Volkswagen Golf R (MkVI)

Please Note:
This fits 4-Motion AWD & Quattro AWD vehicles only.