LOCTITE — Epoxy & Structural Adhesives — Epoxy Adhesive, 21426 Series, Gray, 1:01 Mix Ratio, 10 min Functional Cure, Can

LOCTITE Epoxy & Structural Adhesives built for consistent performance in maintenance, inspection, and replacement work.

Quick specs

• Color: Gray
• Features: Bonds Virtually Any Material, Repair, Fill and Seal Holes, Cracks and Worn Surfaces, May Be Drilled, Tapped, Sanded, or Machined and Painted After Cure
• Includes: Mixing Stick
• Size: 10.0 oz
• Manufacturer Part Number: 209718
• UPC: 079340214262

Product information

• UPC: 079340214262
• Country of Origin: United States
• Manufacturer Part Number: 209718

Dimensions

• Size: 10.0 oz

Details

• Water Resistance: Not Water-Resistant
• Minimum Performance Temperature: -65 Degrees F
• Low Odor: No
• Maximum Performance Temperature: 180 Degrees F
• VOC Content Weight Percentage: 0.04%
• Materials Bonded: Ceramic, Concrete, Masonry, Metal, Plastic, Wood
• Adhesive Consistency: Paste
• Tensile Strength: 1,740 to 3,815 psi
• Hardener Color: Gray
• Included Components: Resin and Hardener
• Alternate Product Name: Loctite Fixmaster Fast Cure Epoxy Mixercups
• Hardness at Full Cure: 87 Shore D
• Primary Applications: General Purpose
• Interior/Exterior: Interior Only
• Full Cure Time: 3 day
• Total Volume: 29.5 mL
• Cured Color: Gray
• Container Type - Adhesives: Can
• Item: Epoxy Adhesive
• Type: Premeasured Cups, No Mess
• Application: For Bonding Glass, Rubber and Metal
• Color: Gray
• For Use On: Glass, Metal, Rubber
• Container Type: Can
• Functional Cure: 10 min
• Full Cure: 12 hr
• Mixing Ratio: 1:01
• Shear Strength: 2,000 psi
• Temp. Range: -65 Degrees to 180 Degrees
• Working Time: 5 min
• Series: 21426
• Structural Adhesive Type: Epoxy Adhesive
• Epoxy Color: Gray
• Epoxy Max. Temp: 199 Degrees F and Below
• Shear Strength (PSI): 2,000
• Temp. Range (F): -65 Degrees to 180 Degrees
• Work Life: 5 min
• Epoxy Container: Can
• Features: Bonds Virtually Any Material, Repair, Fill and Seal Holes, Cracks and Worn Surfaces, May Be Drilled, Tapped, Sanded, or Machined and Painted After Cure
• Standards: ASTM D4060, ASTM D790, ASTM E1640, ASTM F433, ISO 11359-2, ISO 4587, ISO 527-2, ISO 604, ISO 868
• Resin Type: Epoxy
• Includes: Mixing Stick
• Application Method: No Special Application
• Resin Color: Black
• VOC Content Weight: 7.9 g/L
• Cure Method: Ambient
• Non-Sagging: No
• Marine Grade: No

This Epoxy & Structural Adhesives is selected for dependable day-to-day use.

Recommended for facility operations and routine servicing and intended for professional buyers focused on durability and uptime.

Highlights

• Works well in standardized part lists and preventative maintenance schedules.
• Clear specification formatting helps reduce ordering mistakes.
• Organized for straightforward purchasing and stocking.
• Suitable for maintenance, repair, and project-based procurement.

Notes: Review application constraints and installation requirements to ensure the part meets your needs.