This kit enables you to use a Scott's stabilizer with your Honda CRF450L and is designed to mount UNDER the handlebars only for use with stock triple clamps, if you have modified your triple clamp you must notify us so we can obtain all the right information to get you the part that will fit your particular setup. This kit was designed for 1 1/8" (28mm oversize) diameter bars, you may use 7/8" diameter bars, however, you must select the correct option. This option will come with bar reducer bushings which will allow for the fitment of standard bars.

This SUB mount provides 2 possible handlebar mounting positions. Position 1 is 3mm forward of the stock bar position, and position 2 is 13mm forward of the stock bar position. The bar height is raised by 25mm. This mount is compatible with the IMS fuel tank for this model. It uses a standard stepped arm.

"SUB" mount stands for Stabilizer Under Bars, originally designed for raising the bars. These kits are designed for use with Oversize bars. "Bar reducers" are available as an option, to convert the kit to standard diameter bars, should that be desired. This concept allows more room for other equipment such as, Global Positioning Systems(GPS) or Enduro/Rally computers and yet still retain the quick access for adjusting the stabilizer. This is also good for the taller rider who wants his bars a little higher, as it raises the bar location approximately 11-25mm, depending on the model of bike.

In some cases, you might consider a lower bend handlebar bend at the same time, unless you are trying to achieve a higher bar height along with your stabilizer installation. Each SUB mount comes complete with all necessary parts, hardware and "Step by Step" pictured instructions. If you have any questions, feel free to call or email us. 

The Photo attached here may be a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike.

Handlebars are not included.