Coilover Kit MTS Technik for Skoda FABIA I (6Y), lowering the front axle between 15 - 55 mm, and rear between 20 - 60 mm.

Dedicated for the years of: 08/99 - 03/08, for the engine version: 1.0 / 1.2 / 1.4 / 1.4 16V / 1.4 TDI / 1.9 SDI / 1.9 TDI / 1.9 TDI RS / 2.0.

• 2 years warranty 2 year warranty with no mileage limit to confirm high quality.
• High quality Suspension components characterized by increased corrosion resistance and made of the highest quality materials.
• Twin-tube construction The use of twin-tube technology guarantees stable shock absorber performance.
• Gas technology Pressurized gas presses the hydraulic fluid, eliminating the "foaming" effect of the oil (an undesirable and typical for oil shock absorbers phenomenon), which means higher efficiency for continuous, intensive work.
• Specially selected type of thread Specially selected type of thread and a wide range of suspension adjustment allows optimal setting of the car height.
• hexaCOIL adjustable spring perch Innovative hexaCOIL spring perch, significantly increasing the comfort of suspension height adjustment.
• Anti-corrosion protection yellow galvanized Double zinc plated steel shock absorbers as well as anodized aluminum adjusters and caps to ensure increased corrosion resistance.
• Eibach springs Coilover springs made by Eibach, the world leader in the sport springs industry.

Notes:

• 3 - Front and rear axle height adjustable (threaded shock absorber housing on the front, dampers, springs and height adjustable elements on the rear).
• 17 - Only for vehicles without electronic damping.
• 21 - If the vehicle is equipped with a stock sport suspension, the lowering mentioned in this catalogue will be relatively lower.
• 24 - During the installation of suspension set the clearance between tire/rim and suspension strut shall be checked. The minimum allowed gap is 5mm (0,2 inch). Otherwise use certificated wheel spacers.
• 36 - Rear thread adjustment block is mounted on the bottom.
• 55 - Only for versions manufactured between 03/2006 - 12/2008 with the top mounts screwed to the body, OEM number 6Q0 412 331. The top mounts are not included.
• 73 - For easier height adjustment, we recommend removing the rear adjustment, changing the position of the spring plate and reinstalling the adjustment on the car.