Tridonic 28004649 Feig ID ECCO Smart 2D-TR

NFC programmer with QR code reader for current programming

• ID ECCO Smart 2D-TR is a mobile Barcode & RFID detection device with performant scan engine and powerful NFC interface
• For efficient programing of Tridonic LED drivers either by reading a special QR code or use the device in combination with the 4service NFC mobile App
• Further Information see www.tridonic.com/ES2D

Only usable with Tridonic drivers

The ECCO Smart hardware is a product of FEIG ELECTRONIC in Germany. Therefore, the Tridonic version we distributed differs only in the installed firmware. This firmware is written exclusively for Tridonic by Feig. It is installed on the Tridonic version of the ECCO Smart hardware. An ECCO Smart purchased directly from Feig or another source does not have the same range of functions and cannot be used with Tridonic NFC drivers. The Tridonic exclusive firmware can only be installed on the Tridonic hardware version of the ECCO Smart. Installing Tridonics firmware on a non-Tridonic version of a Feig Reader is technically impossible. The hardware blocks it! Following drivers are not supported: EXC4 linear fixed output non-SELV with article numbers: 28003875, 28003876, 28003877, 28003878, 28003879, 28003880, 28004330.