The Hyper Speed Upgrade Kit (Pro3 Series Only) is the first product from Raise3D’s Hyper FFF technology. With the upgrade, the printing speed of a Pro3 Series 3D printer is boosted from an average of 50-80 mm/s to 200-350 mm/s, and acceleration is boosted from 1000 mm/s^₂ to 10000 mm/s², with no loss of accuracy or part quality.The vibration suppression of the Hyper FFF technology minimizes the vibrations of the print head during rapid changes of direction, so that excellent part quality is achieved despite the high printing speed. A printer equipped with a Hyper Speed Upgrade can deliver 600-1000 g of filament within 24 hours, meaning any parts under 400 g will be finished within 12 hours.

The product must be activated after purchase! The upgrade only works on a Pro3 series printer!

For Hyper Speed to function correctly, the Hyper Speed Hot Ends 0.4 mm , the Hyper Speed Auto Calibrator, and the Hyper Speed Filaments must be installed on a Pro3 Series printer activated with Hyper Speed Mode. The absence of any of these components may result in printing failure. One Hyper Speed Upgrade Kit can only be applied once to a single Pro3 Series 3D printer. If you wish to have the Hyper Speed Upgrade on multiple Pro3 Series 3D printers, please buy the corresponding number of Hyper Speed Upgrade Kits.