Product:

Sika #582499 Level SkimCoat, One-component, Fast setting, cement based smoothing and finishing compound skim mortar. Ideal for the repair or reprofiling of concrete. 10 lb Bag. Price/Each.

Ordering Notes:

• SPECIAL ORDER ITEM - NON-RETURNABLE

Description:

Sika #582499 Level SkimCoat is a one-component, easy to use and fast drying, cementitious skim mortar. Ideal for the repair or reprofiling of concrete, approved wood subfloors, and correctly prepared ceramic or quarry tiles before the installation of Sika Level products or final floor coverings. It can be installed as a true feather edge as well as filling voids and leveling defects up to 1/2 inch (13 mm) in depth.

ADVANTAGES:

• Sika Level SkimCoat is easy to prepare and quick to apply
• It repairs new and renovate old floors
• Has good adhesion to substrates, sub-floors and stable adhesive residue
• Rapid setting; receives primers, levelers, adhesives and coverings without delay
• Excellent standard of finish can be achieved to allow direct application of coverings
• Unlimited MVER (Moisture Vapor Emission Rate)

USES:

• It is used to re-profile substrates or sub-floor surfaces from feather edge to 1/2 inch (13 mm) prior to applying Sika Level products or floor finishes
• Repair minor defects, cracks, holes and pre-fill non moving joints and seams in concrete and wood substrates
• Suitable for use with radiant heating systems

SPECIFICATIONS:

• Item no.: 582499
• Packaging: 10 lb bag
• Color: Gray powder
• Shelf Life: 12 months
• Mixing Ratio: 2 qts (1.9 L) of water per bag
• Coverage: 35 ft2 at 1/8 inch depth (3.2 m2 at 3 mm)
• Product Temperature: 65–75 °F (18–24 °C)
• Ambient Air Temperature: 50–86 °F (10–30 °C)
• Relative Air Humidity: < 75%
• Substrate Temperature: 50–86 °F (10–30 °C)
• Pot Life: ~ 10–20 minutes
• Set Time: 20 – 30 minutes
• Final Set Time: 30 – 60 minutes