A 1/16" Spacer for KRC Elite Power Steering Pump!

This spacer will move the KRC Elite Power Steering Pump forward (towards the front of the vehicle) by 1/16", and it is designed be keep the pump mounted flat against the original mounting plate while aiding in the alignment of the power steering pump pulley with the water pump pulley. The Spacer is light weight aluminum it will allow the same bolt diameter to be used that was included with your KRC pump kit. 

Spacer range: 1/16" (1.58mm)

For additional thickness, order more than one piece, for 1/16" spacing increments (i.e. if you need 1/8" spacing, order two pieces, etc).

The hardware you originally received with your KRC pump can be used with one spacer.  If you are using more than one spacer, you will need to acquire longer fasteners than what you have.  The bolt is 5/16-18 thread, but you will need to determine the correct bolt length based on your choice of spacers.

What you get:  One custom aluminum, water jet cut, 1/16" spacer when you order one piece.