Speaker Driver #CT830A-T72 (8? 20W coax, xfmr)

PERFORMANCE

Background music and paging

FEATURES

• Driver:  8 in. 20W coaxial speaker with high frequency driver with first order high pass filter to protect it from harmful bass energy.  12 oz. ceramic magnet.

• Frame:  20-gauge stamped steel with zinc-plated finish.

• Mounting Bolt Circle:  7.625 in. diameter

• Transformer:  25V/70V with taps at .25, .5, 1, 2, 5W

• Assembly Frequency Response:  57Hz–13.5kHz (±6dB) and 44Hz–20kHz (±8.4dB)

• Assembly Mounting Depth:  3.20 in.

• Assembly Dispersion Angle:  80 degrees conical

• Assembly Average Sensitivity:  97.4dB

COMPLIANCE & CERTIFICATION

• Made in U.S.A. with global components

• Meets or exceeds industry standards

A&E SPECIFICATIONS

The 8 in. speaker with mounted transformer shall be Lowell Model No. CT830A-T72 which shall be of the coaxial type having electrically independent high and low frequency transducers and power rating of 20 watts RMS. The low frequency section shall have an 8 in. diameter cone; the high frequency section shall have a 3 in. diameter cone.A built-in electrical crossover network shall be employed to accomplish proper frequency selection between the two drivers. Crossover frequency shall be at 4000Hz. The low frequency voice coil shall have a 1 in. diameter and operate in a magnetic field derived from a strontium ferrite (ceramic) magnet with nominal weight of 12 oz. The high frequency voice coil shall have a 0.57 in. diameter and operate in a magnetic field derived from a strontium ferrite (ceramic) magnet with nominal weight of 2.1 oz. Voice coil impedance shall be 8ohms. The speaker shall have a structurally reinforced, stamped 20-gauge steel frame with 8.062 in. overall diameter and eight obround holes equally spaced at 45 degrees on a 7.625 in. diameter mounting bolt circle. External metal parts shall be zinc-plated to resist rust and corrosion. The speaker shall have a mounted transformer with primary taps at .25, .5, 1, 2, 5W @70/25V. The assembly shall be capable of producing a uniform audible frequency response over the range 57Hz-13.5kHz (±6dB) and 44Hz- 20kHz (±8.4dB) with dispersion angle of 80 degrees @2000Hz (-6dB). Average sensitivity shall measure 97.4dB (SPL at 1W/1M). Assembly mounting depth shall not exceed 3.2 in.