Save with a 2 Pack of Xtreme Heaters Medium 600W Bilge Heaters

Xtreme bilge heater Suitable for most boats up to 28′ Length 

The 600W Xtreme Heater is the perfect choice for most boats up to 28 feet, including single-engine pocket cruisers, large runabouts, sail boats, fishing boats, and smaller boats stored on a lift or trailer. This medium-sized heater is designed to efficiently maintain above-freezing temperatures in your engine compartment, ensuring your boat is protected from cold weather.

Ideal for boats with a single engine, the 600W Xtreme Heater offers reliable performance in a compact form. It is specifically engineered to circulate warm air effectively. Whether your boat is in the water or stored on a lift, this heater helps protect against the risks of cold weather, making it an essential addition to your winterization process. If your boat is stored on a lift or trailer, we recommend choosing a heater one size larger or a second heater than the suggested model for optimal performance.

• True Forced Air Heating circulates air more effectively and heats more evenly for more accurate temperature control.
• Mounting orientation flexibility: Horizontal or vertical installation supported, even upside down.
• Automatic Thermostat turns the heater on at 40°F and off at 55°F (+/- 3°F) for tight, reliable control.
• Failsafe Design cannot overheat; the heating technology is dynamic and self-regulating.
• High Efficiency produces heat faster, circulates more air, and shuts off earlier to save energy.
• Pre-wired 15 ft marine-rated power cord with a 110V 3-prong plug for plug-and-play installation. No hardwiring required.
• Maximum Life: Designed for durability and reliability in harsh environments.
• Corrosion protection: Fully anodized inside and out to resist corrosion in wet and salt-air conditions.
• Mounting hardware included: Stainless Phillips head screws.
• Energy note: thermostatically controlled can reduce energy use up to 75% compared to continuous-run heaters.
• Certified and independently tested.
• IP68 rated: The assembly is sealed for rugged use resists dust and moisture exposure in dirty, damp conditions and handles wet, harsh environments without failing.
• Ignition protected: Tested to U.S. Coast Guard standards (USCG 33 CFR 183.410) and SAE J1171.
• Mil-Spec tested: MIL-STD-810E Method 514.4 for vibration, humidity, and high/low temperatures.
• 5-year warranty (best in the business), backed by U.S.-based support.
• Built for freeze protection in compartments, enclosures, Marine engine compartments, and utility bays.
  

The Xtreme Heater was designed with a focus on safety, reliability, and efficiency, making it the top choice for boaters owners. By providing dependable heat, our heaters ensure extended time on the water without worry.

Maximize the advantages of incorporating a second heater onto your boat or RV - increased coverage and even distribution of warmth. Strategically position them in a clockwise pattern to optimize their supplementary role in circulating heat throughout the engine room, similar to a push-pull effect. Ideal for larger areas or colder environments requiring additional heating.

SHOP 2Pack SMALL HEATER HERE (24' Length and Small RV compartments)
SHOP 2Pack LARGE HEATER HERE (35′ Length and RV large size compartments)

Owners manual click here 

Specifications

• Wattage: 600W
• BTU: 2047.3
• Inrush(startup) current: 11.4A 1 sec.
• Typical operating current: 5.2 A
• Fan flow 58CFM
• 69.2 Db 
• IP68 (Waterproof) rated Fan
• MTBF for fan: 40,000
• Heater Dimensions: 8″ x 3.5″ x 5 1/8″
• Box packaged Dimensions 12″ x 6″ x 6″
• Fuse or breaker size required 15A
• 15ft marine rated power cord
• UPC-895670001255

Suitable for boats up to 28′ Length

Because boats vary in materials, insulation, and design, it's essential to carefully assess your specific needs and climate to determine the most suitable heater. In some cases, depending on the size and configuration of your boat, more than one heater may be necessary to ensure adequate protection.