Enhance the front end of your F8X M3 or M4 with our 100% genuine carbon fiber front lip setup. The kit includes the front lip and two lower splitters, both fully carbon fiber. The Performance V1 front lip differs from similar style lips with its' 100% carbon fiber splitters. Many other carbon distributors use thicker splitters that utilize fiberglass with a thin layer of carbon fiber on the top to give the appearance of genuine carbon fiber, giving unnecessary thickness and overall worse fitment. These splitters are thinner and stronger because they are 100% carbon fiber. Every piece of carbon is quality-checked before shipping. All of our carbon fiber pieces come equipped with a high-quality clear coat to prevent UV damage and limit damage from minor rock chips. We highly recommend professional installation, if you have any questions or concerns regarding installation please feel free to contact us via the contact form below. We promise high-quality fitment and finish on all of our products. All orders ship out directly from our location in Los Angeles, CA. 

Installation is straightforward, needing only self-tapping screws and double-sided adhesive tape, with no need for extra modifications. You can keep the front bumper on the vehicle during the process. Please be aware that self-tapping screws are included but are universal for all our F8X front lips. Precise measurement and the addition of washers as required are vital to avoid any potential damage to the top side of the front bumper.

We recommend adding self-tapping screws underneath the splitters, on each end of the lip and the center. Please note paint may be visible behind the top side of the splitters, this is a common issue, even on OEM BMW M Performance splitters. Drilling is required and professional installation is highly recommended. We recommend using self-tapping screws or rivots for installation.  

Protect your lip with the optional Scrape Defense Lip Protector Kit. 

FITMENT

- BMW F80 M3

- BMW F82/F83 M4