Tips for purchase

1. It is an air conditioner thermostat, and only supports infrared remote control air conditioners.

2. It is not a universal remote control, only supports air conditioners, not other devices.

3. It can only be bound to one air conditioner

4. It needs a WiFi 2.4GHz network that is always connected when it works. Please turn on 2.4GHz WiFi and stay online.

5. It does not have a built-in battery and requires constant USB power supply.

6. Bluetooth only works when configuring

7. All temperature and humidity sensors will have certain errors, please note. The error of this sensor is ± 1 ℃ and the error of humidity is ± 5% RH

8. The minimum granularity of historical data (daily chart) is 1 hour, and the minimum granularity of exported data is also 1 hour.

9. Days of historical data are stored for 7 days. The value of historical data is the average value, that is, the average value in a minimum granularity time.

About using temperature or humidity data as automation conditions

The sensor data uses the principle of Edge Triggered

That is, the action can only be triggered if the condition crosses the set condition

For example, when the automatic setting temperature is greater than 25 ℃, then turn on light.

1. When the temperature rises from below 25 ℃ to 25 ℃, the automatic process can trigger to turn on light.

2. After the automatic process is set, the temperature is always above 25 ℃, and the light is not turned on.

3. When the temperature drops to 25 ℃ and rises to above 25 ℃, the automatic process will be activated.

For example, when the automatic setting temperature is less than 20 ℃, turn off the light.

1. When the temperature drops from above 20 ℃ to 20 ℃, the automatic process can trigger to turn off the light.

2. After the automatic process is set, the temperature is always below 20 ℃, and the light is not turned off.

3. When the temperature rises to 20 ℃ and then drops to above 20 ℃, the automatic process will be activated.

Product Features:

1. Square LCD screen alows reader’s eyes to browse the entire screen in a circle trajectory , make the visual center more clear.
2. Infrared sensing backlight makes you browse the screen clearly in darkness.
3. Sensitive touch buttons, you can easliy operate by pressing them, no need to open your APP, it is more convenient for childre and elders.
4. When your AC runs at low-energy consumption temperature , it is helping you save energy.
5. When AC buttons match completed and code library downloaded successfuly , you can still control AC by pressing the touch buttons when the network thermostat connected is offline.
6. When the Air filter used to 100%, it reminds you to remove the filter and clean , make AC works properly.
7. Any operations on control panel in APP or on touch screen will sync.
8. You can place it on the table , or hang on the wall just for your convenience.