Don’t miss these double walled Snowglobe  glass tumblers! They feature a clear glass style and bamboo lid with plastic straw.  so you can easily hold them and take a sip! Sublimate or decorate the glass first, and then Fill with your desired items, glitter, sequins etc, and add your liquid.   Fill the hole with UV Resin or similar , then  Just fill the glass with your favorite drink, enjoy and have fun!

These  glass tumblers are ready for sublimation.  

DOES NOT QUALIFY FOR FREE SHIPPING.  THERE WILL BE AN ADDITIONAL CHARGE FOR SHIPPING THESE CUPS.   

Total height of tumbler to top of lid is approximately 7 inches.  

 Straight Sides 

manufacturer recommended pressing temps and times , HOWEVER THESE MAY VARY BASED ON YOUR EQUIPMENT

 Disclaimer:

1.Do not seal the hole or pour in anything before sublimating;

2.Please avoid extreme heating after sealed.

Do not leave it in the car in hot summer after sealed.

Do not heat it in any way after sealed.

3.It's suitable for drinking cold or warm water,

not hot water. We suggest not higher than 140°F.

Craft Steps:

1.Make sublimation print on the glass;

@Suggest using an oven, 356°F and 10 minutes.

® Do not use heavy pressure if using a heat press.

Light pressure is best. Suggest 356°F and 60s.

 2.Pour glitter or oil through the hole at the bottom after sublimated;

Glitter first and then mixed VG/distilled water, you can also DIY something

3. Seal the hole with UV resin, UV light for 2 minutes;