✅ Significantly more direct feedback to the driver
✅ Durable bushings
✅ Chassis can react faster & more accurately

EXACT GEOMETRY

Factory landing gear bushings tend to be soft for comfort and provide a degree of play at the linkage. However, the forces occurring at the wheel are then transmitted to the chassis in a distorted manner and vice versa. As a result, the chassis is sluggish and cannot react to these forces to the full extent of its capabilities. This also applies to the driver. With harder bushings, this play can be reduced to a minimum and the chassis can be fully exploited.

If values ​​such as camber, track, caster, etc. are set, the vehicle is at a standstill. If it is now set in motion, there will be slight deviations from these values ​​due to the intended play in the factory rubber bushings. While these deviations are negligible in road traffic, they can make the difference between victory and defeat at the limit. Hard bushings reduce this play to a minimum and ensure that you always ride at the exact values ​​you set.

The set includes the following sockets:

- 2x Rear axle trailing arm front bush
- 2x Rear axle upper wishbone inner bush
- 4x Rear axle lower wishbone outer bush
- 2x Rear axle lower wishbone inner bush
- 2x rear stabilizer bush
- 2x Bush rear tie rod, stabilizer bar side
- 2x Bush rear connecting rod, wishbone side

DETAILS

Do you only need individual sockets from this set? No problem, just write us one E-mail or call us.

Note: This kit is not compatible with BMW M models. The outer bushing of the lower rear control arm is not suitable for the upper steering knuckle mount on heavily lowered vehicles, as this significantly alters the steering knuckle angle. Please select the appropriate quantity: 2 or 4 pieces.

Delivery: complete socket set rear axle, mounting grease

TECHNICAL DATA