We carry the Interceptor Scan gauge for the 2013-2018 Ford Focus ST/RS.

The Scan gauge, is a very special type of instrument gauge that connects within seconds to your cars OBD2 port, located right below your dashboard.

The OBD2 port is a diagnostic port that is used for dealerships, service stations, and even emissions testing facilities to connect a computer to your car to see how your cars running, problems with your car, etc. Because the OBD2 port communicates lots of different parameters of your engine, you can view tons of information! Furthermore, it will not interfere with the OBD2 ports operation, because it simply plugs in, and is not hardwired, and no wires are cut, chopped or soldered for the gauge to work!

Here's a listing of some of the many different engine parameters that can be viewed with this gauge.

RPM
MPH
Intake Air Temperature (post Intercooler)
Engine Coolant Temperature
Battery Voltage
Long Term Fuel Trim
Short Term Fuel Trim
O2 Sensor Voltage
Manifold Pressure (vacuum/boost) displayed in PSI
Ignition Advance
Knock Retard
Fuel Status (open/closed loop)
Throttle Position Percentage
Engine Load
Ability to check AND ERASE ENGINE CODES
Ability to record engine parameters for 60 seconds and review parameters.

The Interceptor gauge is 52mm (2 1/16") in diameter and will fit in all standard gauge pods of this size. A 5' cable is included with appropriate OBD2 connector.

A function menu is available by pushing both buttons simultaneously. One menu option allows you to enter a record mode. Once selected, the Interceptor will return to normal scan mode, but will start recording the displayed data automatically when the throttle exceeds 60%. Approximately 60 seconds of data will be stored. Returning to the menu screen, you can choose to replay the stored data on the Interceptor display.

The gauge displays 2 parameters at a time, but can be programmed to cycle through up to 8 parameters during a user determined period of time. This way you can monitor several items without taking any other actions.
Please note: Aeroforce is no longer shipping these guages with the metal U shaped bracket for mounting. They claim that they found almost all customers are using pods that dont require the metal U shaped bracket, and so they are no longer shipping these gauges with that bracket and nuts. If you are mounting this gauge into a pod, we would recommend using electrical tape around the body of the gauge for additional friction to hold it more tightly into the pod upon insertion.